EK Technologies

Intermediate switch An intermediate switch is a switch which permits the control of a lighting point from three positions. In order to control this lighting point from the three positions, the intermediate switch is connected together with two other 2-way switches. Application: it can be used in lighting a room or hall having 3 entrances , it can also be used in long corridors and staircases. We shall be looking at these connections. Connection diagram of intermediate switching Below is an illustration of the connection. The brown lines indicated on the diagram are the switching contacts. The switch labelled 2 is an intermediate switch . The figure below is the configuration of an intermediate switch. The switch labelled 1 and 3 in the first diagram are two-way switches.  Click here to know more about two-way switches . ON and OFF positions of intermediate switching ON positions OFF positions Staircase wiring layout using an inte...

Design and realization  of an automatic industrial sorting and counting machine In order to present this project, this dissertation is divided into five chapters.   Chapter 1: General introduction of the system. Chapter 2: Review of related literature on the project and contents related to the project. Chapter 3: Technological study of components (theoretical study, dimensioning of components and choice criterion). Chapter 4: System simulation and practical implementation. Chapter 5: Difficulties encountered, recommendations, future scope, and conclusion. Get complete PDF, simulation, codes, and PCB design. Link at bottom Problem s tatement  In modern industry, the sorting of items or products into various categories by an automated system is of great importance in order to have competitive advantages in production speed, efficiency, production value and labour cost. This project involves designing and realizing an automated industrial sorting mach...

Best Electrical Projects for Engineering Students and for research Industrial sorting machine based on items height    Industrial sorting based on items colour Design and realisation of a home automated speech load control system for disables. Automated counting of industrially manufactured products. Detection of broken conductors in underground canalisation Design of a conveyor belt system with speed control system. Advanced Monitoring system of meat in a cold room   pH meter for detecting the quality of meat Ferrari’s based current minimizing torque control of permanent magnet synchronous motor. GSM based pre-energy meter billing system GSM based post-energy meter billing system Design and conception of a 12V voltage multiplier of up to 2KV DC by using the Max generating principle Power factor measurement system Measurement of power in a single phase system A microcontroller based Password circuit breaker Analysis and design of a power managem...

Direct On Line starting semi automatic method  This is one of the simplest method of starting motors by connecting them directly to the supply using a single contactor. Note that this method is limited in starting motors with power less than 10KW because of the high starting current which is about 4 to 6 times the nominal or rated current. In larger motors the Starting current is so high that it may destroy destroy the windings of the motor. So this starting method should not be used to start motors whose power is greater than 10KW. Other starting methods such as the Star-Delta starting, stator resistance starter, rotor resistance starting, star-delta resistance starting and auto-transformer starting can be used to reduce this high starting current which we shall later see. Now let us look at the direct on line starting. View of a direct on line starter Connection of Direct On Line starter Semi automatic starting method for One direction of rot...

Teleruptor (Teleswitch) A teleruptor   is an electrical device, which is used to control a lighting point from many positions (3, 4, 5, or more) unlike one way or two way switches. This device has an advantage over an intermediate switch (which can only control a lighting point from only 3 positions). Push buttons are used at the various control points to activate this device which puts on the lamp. We are going to see how to connect this device. Before that, it is very important to know its area of application. Application: The above mentioned advantage, permits this device to be used in: Long corridors, stair case, and halls or rooms with more than 2 entrance. Wiring a teleruptor Below is a view of a teleruptor showing its contacts labeled and also indicated in the wiring diagram. View of teleruptor and wiring The teleswitch is made up of a coil which energizes or dis-energizes thereby closing or opening its contact respecti...